Connect with us


How do you seal an old brick foundation? |



When you have a leaky foundation, sometimes it is best to tear everything out and start over. This can be expensive and time-consuming. The question of how do you seal an old brick foundation has plagued homeowners for generations now. There are many options available, but the most common solution would simply be to pour concrete around the bricks which will provide additional insulation from the outside world without requiring any other work on your part or that of your contractor’s.

Parging is an exterior coating that can be used to seal old brick foundations. It’s a mix of Portland cement, sand, and water that is applied to the surface of the foundation. Read more in detail here: parging old brick foundation.

How do you seal an old brick foundation? |


  1. Using the shovel, remove soil from the foundation wall, exposing the whole wall to the concrete footing.
  2. Using the 6-inch masonry brush, remove any dirt and dust from the wall.
  3. Using the 6-inch masonry brush, apply the pre-mixed cement-based masonry sealant to the brick foundation wall.

So, how do you keep ancient bricks sealed?

Using a push broom or a brush, scrub the bricks thoroughly to remove dirt and debris from the mortar joints as well as efflorescent residue from the brick surface. Allow time for the brick to cure completely before applying the sealant. Inspect the mortar joints for indications of degradation and, if required, seal or caulk them.

Also, what is the best product for sealing bricks? In February of 2020, the best brick and masonry sealer will be revealed.

Editor’s Choice: SX5000 Silane-Siloxane Sealer5 GallonSolvent
A-Tech Masonry & Brick Sealer (Editor`s Choice)5 GallonWater
Chimney Water Repellent CHIMNEYRX1 GallonWater
Waterproofer Eco Advance16 ounces (Liquid Concentrate)Water

How can you fix an ancient brick foundation with this in mind?

Follow these procedures to do the fixes yourself:

  1. 1Using a thin cold chisel and a hammer, chip away at cracked and loose masonry.
  2. 2Prepare your mortar and put aside for approximately five minutes to enable the mixture to solidify.
  3. 3Use fresh water to clean the joints.
  4. 4Using a pointed trowel, apply the mortar.

Is it a good idea to seal brick?

Without a sealant, a good brick may easily endure hundreds of years. The mortar used by many bricklayers now differs from that used 100 years ago. The additional cement protects the mortar from the elements. As a result, sealers aren’t required to keep the mortar safe.

Answers to Related Questions

What is the best way to preserve ancient bricks from crumbling?

Prevention. Keep brick walls dry to prevent them from cracking. Maintain gutters with care, eliminating any debris on a regular basis and ensuring that downspouts are functioning properly. Water seeping through the wall from a gutter that spills into the ground near the home may cause major damage.

Is it necessary to waterproof brick walls?

Brick is not a waterproof material. In reality, many modern brick veneer homes leak, and they leak extensively. Fortunately, there are straightforward solutions for getting this water outside again. Almost any brick wall will enable water to pass through.

When it comes to brick sealer, how long does it last?

7 to 10 years

Is Thompson Water Seal OK for use on brick?

Coating Application

Only apply Thompson’s® WaterSeal® Waterproofer Plus Masonry Protector if there is enough airflow. TIP: DO NOT use a varnish or polyurethane on outside brick, concrete, stone, or other masonry surfaces as a surface treatment.

How do you keep bricks dry in the rain?

External Damp Issues Can Be Solved By Waterproofing Your Exterior Brick Walls

  1. One of the greatest methods to keep your brickwork watertight is to use Dryseal waterproofer.
  2. Missing bricks and masonry flaws might enable wet to seep into the wall.
  3. Salt deposits may form on damp walls, which can cause your plaster to fly away.

How much does a foundation repair cost?

According to Paul, normal repairs cost between $15,000 and $35,000. (ours came in near the upper end of this range). However, in extreme circumstances when the foundations are in risk of collapsing, the cost might be $100,000 or more. Various remedies are available from foundation-repair firms.

What is the best way to fix a foundation?

How to Repair Foundation Cracks in Your Home

  1. Remove any stray chips from the area and clean it up.
  2. To make the concrete patch, combine all of the ingredients in a thin paste.
  3. After spraying the crack with water, apply the patching paste using a trowel.
  4. Scrape away any extra paste with a trowel to achieve a smooth and consistent surface.

Is it true that brick foundations are bad?

Brick foundations are particularly vulnerable to these issues because pressure exerted on the mortar sections causes microscopic fractures to appear. The walls of your foundation may then rotate, and even brick, which is a strong material, will not be able to resist the stress and pressure.

What is the best way to repair an ancient brick wall?

Replacing a Loose Brick (Method 4)

  1. With a chisel, chip away at the old mortar.
  2. Remove the stray brick.
  3. Using a damp bristle brush, scrub the brick.
  4. Combine the ingredients for a batch of brick mortar.
  5. Use the moistened brick and cavity to apply the mortar.
  6. Return the brick to its original position in the hollow.
  7. Allow 1-2 days for the mortar to dry.

How do you fix a crumbling brick wall?

Repairing bricks that have been damaged

  1. Consult an experienced bricklayer with experience working on historic structures.
  2. To cover the degradation, carefully cut off and flip the block around.
  3. Use a colored lime mortar to cover the damaged brick’s face.
  4. Remove and replace any bricks that are significantly damaged.

What is the cost of repairing a brick wall?

Average Brick Repair Costs

According to HomeAdvisor.com, brick repair costs range from $1,300 to $2,000 countrywide, with some repairs exceeding $4,000. Smaller brick repair operations, such as mending cracks in ten or less bricks, are often around $500.

Are you able to repoint bricks on your own?

This tutorial will walk you through the procedure if you are capable of doing the job yourself. One thing to keep in mind, though: repointing should never be done in the winter, since the newly placed mortar will be damaged by wind and rain. You’ll need to start by gathering a variety of repointing equipment.

How do you seal a house’s bricks?

Apply a sealant to your outside brick to preserve it from water damage and to keep moss at bay. Allow the brick to dry fully after cleaning it. Using a pump sprayer and a paint roller, apply a high-quality sealant. This easy DIY technique might save you a lot of money in the long run on maintenance.

Is it possible for rain to pass through bricks?

Unfortunately, since brick is a porous material, it will absorb rainwater. This rainwater may then seep into the inside of the building, causing structural damage. Because brick is porous, any water that comes into touch with it will be absorbed. The brick has the ability to contain the water inside itself.

Is it possible to apply concrete sealer on brick?

For Porous Building Materials, the Best All-Purpose Sealer

LastiSeal may be used to seal porous pavers, stones, tiles, grout, and porous masonry, in addition to brick and concrete. LastiSeal may be used on any porous substrate, according to the rule of thumb.

What is the best way to keep a brick wall from leaking?

Check the condition of the mortar joints between the bricks and make any required repairs. Apply a silane/siloxane water repellent to the whole brick wall after the mortar is in good form. Keep a careful eye on the stated guidelines for air temperature and the quantity of water repellent to use.

Is Thompson’s Water Seal safe to apply on brick?

Only apply Thompson’s® WaterSeal® Waterproofer Plus Masonry Protector if there is enough airflow. TIP: DO NOT use a varnish or polyurethane on outside brick, concrete, stone, or other masonry surfaces as a surface treatment.

Continue Reading


A Comprehensive Examination of ARIX Price: Assessing Growth Opportunities




In the ever-evolving world of finance and investment, cryptocurrency has emerged as a revolutionary asset class, disrupting traditional markets and attracting investors worldwide. Among the vast array of digital currencies available, ARIX has gained significant attention due to its unique features and growth potential. In this comprehensive examination, we will delve into the intricacies of ARIX’s price, further exploring the factors that influence its value and assessing the growth opportunities it presents. In the ever-evolving landscape of online trading, platforms like quantum-connects.com stand out for their innovative approach to market analysis. Delving into the intricacies of ARIX price can offer insights into potential growth trajectories.

What is ARIX?

ARIX is a decentralized cryptocurrency operating on a blockchain platform, ensuring swift and secure transactions while maintaining transparency and immutability. Its appeal lies in providing an alternative investment option to traditional financial systems. With faster processing times, lower fees, and increased user control, ARIX presents an enticing opportunity for investors seeking to explore the dynamic and evolving world of cryptocurrencies. However, potential investors should be mindful of the inherent risks associated with cryptocurrency investments, including price volatility and regulatory uncertainties. Therefore, thorough research and caution are advised before making any financial commitments to ARIX or other cryptocurrencies.

Understanding ARIX Price Fluctuations

As with any asset, the price of ARIX is subject to market forces, which can lead to fluctuations in its value. Several factors contribute to these price movements, and understanding them is crucial for investors looking to make informed decisions.

Market Demand and Supply

The basic principles of economics apply to cryptocurrencies, including ARIX. When demand exceeds supply, the price tends to rise, and vice versa.


As the adoption of ARIX increases, driven by factors like its utility and technological advancements, demand is likely to grow, potentially impacting its price positively.

Technological Advancements

The development of innovative technologies within the ARIX ecosystem can significantly influence its price. Upgrades that enhance scalability, security, and transaction speed can attract more users and investors, driving demand and contributing to price appreciation.

Regulatory Environment

Government regulations and policies play a crucial role in shaping the cryptocurrency market. Favorable regulatory frameworks can instill confidence in investors and lead to increased adoption of ARIX, propelling its price upwards. Conversely, adverse regulations can have the opposite effect.

Growth Opportunities for ARIX

Investing in ARIX offers a range of growth opportunities, making it an intriguing prospect for both seasoned and novice investors.


Diversifying one’s investment portfolio is a prudent strategy to mitigate risk. Including ARIX in a well-balanced portfolio can provide exposure to the crypto market’s potential upside while offsetting risks associated with traditional assets.

Early Adoption Benefits

Investing in ARIX at an early stage can offer substantial benefits. As the cryptocurrency gains popularity and value over time, early adopters can enjoy significant returns on their investments.

Technological Innovation

The cryptocurrency space is continuously evolving, with projects like ARIX pushing the boundaries of innovation. Investing in ARIX allows investors to support technological advancements and be part of groundbreaking developments within the industry.

The Future of ARIX

Predicting the future of any investment is challenging, especially in the volatile world of cryptocurrency. However, several factors suggest that ARIX has the potential for growth and sustainability.

Strong Community and Developer Support

A robust and active community, along with dedicated developers, is crucial for the success of any cryptocurrency project. ARIX benefits from a passionate community and a team of experts committed to its continuous development and improvement.

Real-World Applications

Cryptocurrencies with practical use cases are more likely to gain traction in the market. ARIX aims to be more than just a speculative asset, with plans to integrate its technology into various real-world applications, potentially increasing its demand and utility.


Market Recognition and Partnerships

As ARIX gains recognition in the financial industry, it has the potential to form strategic partnerships with established players, further bolstering its credibility and attracting more investors.


Investing in cryptocurrencies, including ARIX, can be a rewarding but volatile endeavor. As with any investment, thorough research and understanding of the underlying factors are essential. ARIX’s unique features, strong community support, and potential real-world applications position it as a promising investment option with growth opportunities.

Continue Reading


O3 Swap: Revolutionizing Cross-Chain Asset Trading




In the rapidly evolving landscape of cryptocurrency and decentralized finance (DeFi), staying ahead requires embracing innovation. O3 Swap is an exceptional platform that has been garnering significant attention in the industry. By introducing a groundbreaking methodology for cross-chain asset trading, O3 Swap is revolutionizing how users can exchange and oversee their digital assets. This article will extensively explore the distinctive features, inherent benefits, and immense potential of O3 Swap, shedding light on how it is reshaping and redefining the concept of cross-chain asset trading. The Quantum Prime Profit system is an excellent trading platform that provides information about the shifting bitcoin market. This platform will assist you in comprehending the complexity and dynamics of the crypto sector.

The Need for Cross-Chain Asset Trading

As the blockchain ecosystem continues to grow, different blockchains have emerged, each with its own set of features and functionalities. This diversification has led to a fragmented landscape where assets are confined within their respective chains. Consequently, users face challenges when attempting to exchange assets across different blockchains, often encountering high fees, long transaction times, and limited liquidity.

Enter O3 Swap

O3 Swap is an innovative platform designed to bridge the gap between different blockchains and enable seamless cross-chain asset trading. By leveraging advanced technologies and protocols, O3 Swap empowers users to trade assets effortlessly, regardless of the underlying blockchain.

The Benefits of O3 Swap

Enhanced Liquidity: O3 Swap aggregates liquidity from multiple sources, including decentralized exchanges (DEXs), automated market makers (AMMs), and liquidity pools. This pooling of liquidity ensures that users have access to a deep and robust market, allowing for efficient and cost-effective asset swaps.

Reduced Costs: By eliminating the need for intermediaries and optimizing trading routes, O3 Swap significantly reduces transaction costs associated with cross-chain asset trading. Users can save on fees and maximize their returns, making O3 Swap an attractive option for traders and investors alike.


Fast and Secure Transactions: O3 Swap leverages cutting-edge technologies to enable near-instantaneous asset transfers across different blockchains. The platform ensures the security and integrity of transactions through rigorous protocols and smart contract audits, providing users with peace of mind when executing trades.

User-Friendly Interface: O3 Swap prioritizes user experience, offering an intuitive and user-friendly interface. The platform is designed to cater to both experienced traders and newcomers, with clear and concise instructions that guide users through the trading process.

How O3 Swap Works

O3 Swap employs a unique architecture that combines cross-chain liquidity aggregation, routing optimization, and smart order routing. Let’s explore each of these components in detail:

● Cross-Chain Liquidity Aggregation

O3 Swap aggregates liquidity from various DEXs and AMMs, allowing users to access a wide range of trading options. By combining liquidity from different sources, O3 Swap ensures competitive pricing and reduces slippage, providing users with the best possible trading experience.

● Routing Optimization

To optimize asset swaps, O3 Swap utilizes advanced algorithms and data analysis. The platform considers various factors, such as liquidity depth, transaction costs, and historical data, to determine the most efficient trading route. By optimizing routing, O3 Swap minimizes costs and maximizes returns for users.

● Smart Order Routing

O3 Swap’s smart order routing mechanism intelligently splits orders across multiple liquidity sources to achieve the best possible execution. This ensures that trades are executed seamlessly and efficiently, enhancing user satisfaction and improving overall liquidity in the market.

The Future of O3 Swap

O3 Swap’s mission is to bridge the gap between different blockchains and create a unified ecosystem for cross-chain asset trading. The platform aims to continually expand its supported chains, integrate with additional liquidity providers, and enhance its trading algorithms to provide users with unparalleled trading experiences.


As the blockchain industry evolves, O3 Swap is well-positioned to play a crucial role in facilitating seamless cross-chain asset trading and fostering greater liquidity across the ecosystem.


O3 Swap is an absolute game-changer when it comes to cross-chain asset trading. This platform stands out by prioritizing liquidity aggregation, reducing costs, facilitating fast transactions, and providing users with a remarkably user-friendly interface. The impact of the O3 Swap is nothing short of revolutionary, as it transforms the methods by which users trade and oversee their digital assets. By effectively bridging the divide between various blockchains, O3 Swap ushers in a new era of interoperability and accessibility within the decentralized finance realm. Embrace the future of cross-chain asset trading by embracing O3 Swap!

Continue Reading


EPIK Prime (EPIK): Unleashing the Power of Decentralized Gaming and Digital Collectibles




In the rapidly evolving world of blockchain technology, EPIK Prime (EPIK) is a game-changer that combines decentralized gaming and digital collectibles. With its innovative approach and groundbreaking features, EPIK Prime revolutionizes the gaming industry, providing new opportunities for gamers, collectors, and investors. By leveraging blockchain’s transparency and security, EPIK Prime introduces unique in-game assets through non-fungible tokens (NFTs), allowing players to truly own and monetize virtual items. The platform’s play-to-earn model incentivizes active participation, while its marketplace offers rare digital assets for collectors. EPIK Prime is reshaping the future of gaming and collectibles with its visionary integration of blockchain technology. Are you seeking a simple and user-friendly cryptocurrency trading and tracking platform? Coin Cipro App 3.0 will never let you down; it delivers insights and charts, analyzes your trades, and generates real-time information to help you make smarter judgments.

Understanding Decentralized Gaming

Decentralized gaming refers to the concept of using blockchain technology to create gaming experiences that are transparent, secure, and owned by the players themselves. Unlike traditional gaming platforms, where central authorities control the game mechanics, decentralized gaming platforms leverage the power of blockchain to enable peer-to-peer interactions and ownership of in-game assets.

The Rise of Digital Collectibles

Digital collectibles, commonly referred to as non-fungible tokens (NFTs), have experienced a surge in popularity over the past few years. NFTs serve as digital representations of unique assets, allowing individuals to purchase, sell, and exchange them on different blockchain platforms. These collectibles encompass a wide array of digital items, spanning from virtual artworks and music to in-game objects and virtual real estate.

● Introducing EPIK Prime

EPIK Prime is an innovative gaming platform that operates in a decentralized manner, utilizing blockchain technology to deliver an immersive and seamless gaming experience. The platform is fueled by the EPIK token, enabling users to access and enjoy a diverse selection of games and digital collectibles. Whether you’re a player seeking engaging gaming experiences or a collector looking for unique virtual assets, EPIK Prime offers a compelling environment to explore and participate in.

● Game Development on EPIK Prime

EPIK Prime provides a robust infrastructure for game developers to create and deploy their games on the platform. With its developer-friendly tools and resources, EPIK Prime encourages innovation and creativity in game development. Game developers can take advantage of the platform’s decentralized nature, enabling true ownership and monetization opportunities for their creations.

● Play-to-Earn Mechanics

One of the key features of EPIK Prime is its play-to-earn mechanics. Unlike traditional games, where players invest time and effort without any tangible rewards, EPIK Prime allows players to earn real value through their in-game activities. Players can collect rare items, complete quests, and participate in tournaments to earn EPIK tokens and other valuable rewards.

● Digital Collectibles on EPIK Prime

EPIK Prime also serves as a marketplace for digital collectibles, offering a wide range of NFTs for collectors to discover and acquire.


From virtual artworks created by renowned artists to unique in-game items, EPIK Prime provides a diverse collection of digital assets for collectors to explore and trade.

The Benefits of EPIK Prime

EPIK Prime brings several benefits to the gaming community, collectors, and investors:

● True Ownership

EPIK Prime utilizes blockchain technology to ensure true ownership of in-game assets and digital collectibles. Through the use of smart contracts, players and collectors have full control over their virtual possessions, allowing for secure and transparent transactions.

● Interoperability

EPIK Prime is built on interoperable blockchain infrastructure, enabling seamless integration with other decentralized applications (dApps) and platforms. This interoperability opens up new possibilities for cross-platform interactions, collaborations, and economies.

● Community Engagement

EPIK Prime fosters a vibrant and engaged community of gamers, collectors, and developers. The platform encourages active participation and rewards community members for their contributions, fostering a sense of belonging and shared experiences.

● Investment Opportunities

For investors, EPIK Prime presents unique investment opportunities within the gaming and digital collectibles market. As the platform continues to grow and attract more users, the value of EPIK tokens and rare digital assets may be appreciated, providing potential returns for early adopters and investors.


EPIK Prime (EPIK) is at the forefront of the decentralized gaming revolution, combining the worlds of gaming and digital collectibles in an innovative and user-centric manner.


With its play-to-earn mechanics, true ownership of assets, and thriving community, EPIK Prime offers an exciting and immersive gaming experience. Whether you’re a gamer, collector, or investor, EPIK Prime opens up new possibilities and opportunities in the rapidly evolving landscape of blockchain-based entertainment.

Continue Reading